• Dark Wing

    from $ 1.25
    Sold By Dark Star Gear
    The Dark Wing attaches to the holster, in the angle between dustcover and trigger guard, and when worn, is pressed inward by the belt.  This rotates the grip inward and reduces printing for increased concealment.
  • Sale!

    DIY Quick Clip

    from $ 0.88
    SOLD INDIVIDUALLY. Easy on, easy off - Quick-Clips! These clips are U.S. made out of the perfect blend of proprietary polymers - not too soft, not too stiff and bomb-proof durable. These clips are ideal for IWB applications and are tough enough for light OWB applications. We offer these in 1.5" and 1.75" versions that will fit over and grab onto even thick gun belts. Simply push the clip past the belt to hook on and lift the ergonomic tab to un-hook and remove. Hole spacing will accommodate 1 inch and 1/2 inch center to center holes from your holster.
  • This product is intended for DIY/ Gear makers. You may need to drill new holes when attaching to existing holsters and/or pouches.
  • Two pre-drilled holes. Hole Spacing center to center is .885 (sold individually)
  • Clip / Multi Positional / Fits up to 1.75" Belt 2 Hole / Black / G-Code Logo / With Hardware
  • Sale!
    Clip / Multi Positional / Fits up to 1.75" Belt 3 Hole / Black / G-Code Logo / With Hardware
  • GripHooks

    from $ 1.60
    GripHooks offer an adjustable cant option with the same 15mm/0.6in hole spacing that is widely used across the holster industry. It is compatible with the newly released IFI ModWing, as well as with similar products out in the market. The GripHook features a reinforced top curve for rigidity and a wide, aggressive hook portion for firm retention on the belt. The GripHook is made in the USA, and available in 1.5" and 1.75" sizes.
  • These soft IWB Loops are 3/4 inch width. (sold individually)
  • Sale!
    "IWB Strut with Holes on Both Ends" for use with soft belt loops (not included). (sold individually)
  • Sale!
    * without hardware. (sold individually) Three pre-drilled holes with 3/8 spacing on top and no pre-drilled holes on bottom strut.
  • Made for OWB or IWB holsters. The holster maker can position his own hole placement. (sold individually)
  • Used for IWB and OWB holsters. (sold individually)
  • Used for IWB or OWB holsters. (sold individually)
  • Metal Belt Clip

    from $ 0.69
    (sold individually) Black oxide metal 1-3/4 inch belt clip, one pre drilled rivet hole at bottom.
  • Our heavy duty steel belt clips are made out of .040" thick hardened spring steel with a black oxide finish. They are 7/8" wide, 2 7/8" long and will fit belts up to 1.75" wide. The mounting holes are 7/32" in diameter. Unlike other steel clips on the market, we've added a second mounting hole to our clips for added versatility. The second mounting hole in the body of the clip has a 3/8" access hole which makes installing hardware a breeze. These clips are excellent for IWB and light OWB use.
  • (With Hardware) ModWing Light-Bearing Nylon 6,6 Black
  • (With Hardware) ModWing Standard Nylon 6,6 Black
  • Offset Over-hook

    from $ 0.72
    These tough injected molded belt clips allows the clip to naturally follow the lines of the holster and trigger guard without the need of a spacer. The clips Do-Not have pre drilled holes which allows the holster maker to create his own hole spacing.
  • The RCS Vanguard Claw is made to create leverage for the grip of a pistol and assists in keeping it close to the body, without disrupting the draw. The pre-drilled hole spacing is 1.5cm center-to-center. Raven Concealment designed the Vanguard Claw to avoid failure and mitigate stress fractures.
  • Sold individually. Mounting hardware is not included. The RCS Holster Wedge is designed to mount to the inside face of the holster shell toward the muzzle end, the Holster Wedge will help lever the top and grip of the weapon into the body and maximize concealment especially in an AIWB configuration.
  • Raven Concealment Overhook Strut IWB offers a tough snap over to guarantee a snug fit with an easy release. There are ridges on the back of the strut that prevent mounting hardware from damaging holsters and firearms. Each of the pre-drilled holes are 15mm apart center-to-center. With the center hole being a slot, the strut can be rotated up to 10 degrees in either direction. The struts are 3 1/2" long and 3/4" wide.
  • The RCS Vanguard Wing is designed to mount below the trigger guard and is used to leverage the grip of the pistol close to the body, while still allowing for a clean, repeatable draw.  The mounting holes on the Wing are 1.5cm center to center.  
  • These plastic belt clips are engineered with all of the features that you'll want on a belt clip that will hold up to long-term EDC use. The high-strength polymer that is used works better than spring-steel and will be a great upgrade to your holster.
  • Features:
    • Sold Individualy
    • Clips fit 1.5" - 1.75" belt sizes and up to a triple-layer nylon webbing
    • Clips "hook" onto your belt for maximum retention
    • Finger-grab built-in to the end of the clip for easier installation and removal
    • 5 mounting holes, 1/4" apart give you multiple attachment options
    • High-strength yet flexible polymer holds its shape and "spring"
    • Made in the USA
  • The DIY Claw

    from $ 1.00
    Sold Individually. Mounting hardware not included.  
  • ULTICLIP3 provides the same great retention and concealment as found in the original but now with multiple holes for the kydex maker. (sold individually)
  • The Ulticlip Slim 2.2 is slightly over 1/2" wide and only 2.2" long making it ideal for smaller applications while still providing great retention. The single slotted mounting area allows for two screws to prevent the clip from rotating.
  • The Ulticlip Slim 3.3 provides great retention and concealment. It has a dual slotted mounting area that allows for 1.5" hole spacing. The Slim 3.3 is slightly over 1/2" wide making it ideal for knife sheaths or other narrow applications.
  • UltiClip XL

    $ 11.99
    Ulticlip XL is the world’s first multi-tool holster clip and locking steel belt loop. No longer do you have to choose between a holster clip or belt loop; with Ulticlip XL you can have both. (sold individually)